{"product_id":"scarecrow-tea-light-holder-1-cut-file","title":"Scarecrow Tea Light Holder Laser Cut File","description":"\u003cp\u003eScarecrow Tea Light Holder: a tea light holder cut file from MEJA Design Studio, drawn to be cut on your own laser from 1\/8 in plywood.\u003c\/p\u003e\n\u003cp\u003eFlameless LED tea light only: never a real candle (wood burns). The lantern is made for a battery tea light with a plastic flame.\u003c\/p\u003e\n\u003cp\u003eThis is a digital file. Nothing is shipped. You cut the holder yourself from two 12 x 20 in sheets of 1\/8 in (3 mm) plywood.\u003c\/p\u003e\n\u003cp\u003eA scarecrow in a straw hat and patched coat, a crow on his arm and pumpkins at his feet: for autumn and Thanksgiving. The upright is cut as two halves of one outline, a front half and a back half, and each is built up in layers, front and back alike. Paint each half while it lies flat by itself, or cut it from the sticker pack's printed sheet, already colored; then the two are glued back to back: 6 sheets of wood in all, 0.7 in (18 mm) thick. It sets into a base of two plates, and the lantern slots together from two rings, a hoop and a floor (each two sheets, glued back to back): it holds one flameless LED tea light.\u003c\/p\u003e\n\u003ch3\u003eWhat you get (instant digital download, one zip)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe cut files in SVG, DXF, PDF and AI formats: two 12 x 20 in sheets, one file for each sheet in each format\u003c\/li\u003e\n\u003cli\u003eAssembly guide (PDF): every part and every layer by name, the sizes, what you need and the steps, numbered\u003c\/li\u003e\n\u003cli\u003eA picture of the finished holder and a picture of the parts\u003c\/li\u003e\n\u003cli\u003eREADME and your license\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStands 9.6 in tall and 8.2 in wide, on a 9.3 x 3.3 in base\u003c\/li\u003e\n\u003cli\u003eLantern: 3.1 in across, for one LED tea light of the standard size (1.5 in across)\u003c\/li\u003e\n\u003cli\u003e22 parts: the upright's two halves (front and back), two base plates, and two lantern rings, a hoop and a floor of two sheets each, and 10 layers glued on the halves (5 on the front half, their 5 mirror images on the back half)\u003c\/li\u003e\n\u003cli\u003eLayered: the upright is 6 sheets thick (0.7 in), the same picture in relief on its front and on its back\u003c\/li\u003e\n\u003cli\u003eTwo halves: the upright is cut as a front half and a back half. Finish each one flat (paint it, or cut it from the sticker pack's printed sheet), then glue them back to back. The base's slots are cut for the two sheets\u003c\/li\u003e\n\u003cli\u003eTwo-sided lantern: its two rings, its hoop and its floor are each cut as two sheets of one outline, the second a mirror image. Finish each sheet flat on its outer face, then glue the two back to back, so the lantern is finished on both sides. Every slot and notch of the lantern is cut for the two sheets\u003c\/li\u003e\n\u003cli\u003eMade for 1\/8 in (3 mm) plywood ONLY: every slot is sized for that thickness. Do not resize the file: resizing changes the fit.\u003c\/li\u003e\n\u003cli\u003eRed lines = cut. Blue lines = light marks: where the next layer is glued on, and where the tea light sits. Score or engrave them lightly: they never cut through. Part names are written as notes and are never cut.\u003c\/li\u003e\n\u003cli\u003eSold unfinished: the first picture shows the holder painted, the second as it is cut. Paint and stickers are not part of this file.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eYou supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 12 x 20 in sheets of 1\/8 in (3 mm) plywood\u003c\/li\u003e\n\u003cli\u003eOne flameless LED tea light (battery)\u003c\/li\u003e\n\u003cli\u003eA short length of twine or thin wire\u003c\/li\u003e\n\u003cli\u003eWood glue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrefer not to paint?\u003c\/h3\u003e\n\u003cp\u003eA matching printed sticker pack is available in our store: \u003ca href=\"https:\/\/mejadesigns.com\/products\/scarecrow-tea-light-holder-1-sticker-pack\"\u003ehttps:\/\/mejadesigns.com\/products\/scarecrow-tea-light-holder-1-sticker-pack\u003c\/a\u003e. Its sheets go on your plywood whole and your laser cuts wood and paper together, so one face of each part comes out colored.\u003c\/p\u003e\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a DIGITAL file. No physical item is shipped.\u003c\/li\u003e\n\u003cli\u003eLED tea light only. No wax tea light, not even for a moment: thin wood hangs right above it.\u003c\/li\u003e\n\u003cli\u003eYou need a laser cutter and basic knowledge of your machine's software.\u003c\/li\u003e\n\u003cli\u003ePlywood sold as 1\/8 in varies a little in thickness: dry fit the parts before gluing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorks with\u003c\/h3\u003e\n\u003cp\u003eGlowforge, xTool, LightBurn, OMTech, Epilog, Trotec, Thunder and any software that opens SVG, DXF, PDF or AI.\u003c\/p\u003e\n\u003ch3\u003eLicense\u003c\/h3\u003e\n\u003cp\u003eLimited commercial license included: you may sell up to 200 finished items you make from this design. Sharing, reselling or redistributing the digital file is not permitted.\u003c\/p\u003e\n\u003cp\u003eQuestions? Message me any time - happy to help.\u003c\/p\u003e","brand":"MEJA Design Studio","offers":[{"title":"Default Title","offer_id":51032502501632,"sku":"MJ-CF-TLH-SCARECROW-1","price":5.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0716\/7046\/4768\/files\/01_staged_b3c46524-0209-4d58-b916-e29eef5e3d09.jpg?v=1794789366","url":"https:\/\/mejadesigns.com\/products\/scarecrow-tea-light-holder-1-cut-file","provider":"MEJA Designs","version":"1.0","type":"link"}