Prefer not to paint?
Butterfly Garden Heart Box Sticker Pack
The matching sticker pack colors every layer. Stick the printed sheets on your wood, line the laser up on the crosshairs and cut with the sticker on.
The first button puts the sticker pack and this cut file in your cart together: no need to add the cut file again.
Butterfly Garden Heart Box Laser Cut File
Butterfly Garden Heart Box Laser Cut File
Instant digital downloadSVG, DXF, PDF, AI6 x 5.52 x 2.25 in8 pieces
Butterfly Garden Heart Box: a box cut file from MEJA Design Studio, drawn to be cut on your own laser from 1/8 in plywood.
This is a digital file. Nothing is shipped. You cut the box yourself from one 12 x 20 in sheet of 1/8 in (3 mm) plywood.
What you get (instant digital download, one zip)
- The cut files in SVG, DXF, PDF and AI formats: one 12 x 20 in sheet, one file for each sheet in each format
- Assembly guide (PDF): every part by name and number, the sizes, what you need and the steps, numbered, with drawings
- A picture of the box closed, a picture of it open and a picture of the parts
- The bend test strip: its cut file and how to read it
- START_HERE and your license
Details
- Outside size with the lid on: 6 in wide, 5.52 in deep, 2.25 in tall
- 8 parts, all cut from 1/8 in (3 mm) plywood: a heart-shaped bottom, two wall strips that bend (each lined inside its straight half), a rim, the lid and the plate under it
- The lid lifts off.
- The corners lock with finger joints and the bottom is held by tabs in slots: every joint presses together by hand, and glue holds it
- Made for 1/8 in (3 mm) plywood ONLY: every finger and slot is sized for that thickness. Do not resize the file: resizing changes the fit.
- Red lines = cut. Blue lines = light marks (the fine lines of the design (petals, veins, leaves)): score or engrave them lightly, they never cut through. Part names are written as notes and are never cut.
- Sold unfinished: the first picture shows the box painted, the second as it is cut. Leave the wood bare, stain it, or paint it by hand. Paint and stain are not part of this file.
You supply
- One 12 x 20 in sheet of 1/8 in (3 mm) plywood
- Wood glue
- Tape or a band, to hold the box square while the glue sets
- A damp cloth: the slit wall bends more easily damp
- Black stain or paint, if you like: the plate under the lid shows dark behind its openings
Prefer not to paint?
A matching printed sticker pack is available in our store: https://mejadesigns.com/products/butterfly-garden-heart-box-1-sticker-pack. You stick each printed sheet on your plywood, line the laser up on its crosshairs and cut wood and sticker together: 6 parts come out colored, on the faces that show.
Please note
- The walls are pierced right through: what is in the box shows through them, as in a basket. It is a box for keepsakes, gifts and things you like to see, not for hiding things.
- The wall bends on rows of fine slits cut by the laser (a living hinge). How tightly wood bends differs from sheet to sheet, so cut and bend the bend test strip FIRST: it is in the download, and it takes a few minutes and a scrap of the same plywood.
- This is a DIGITAL file. No physical item is shipped.
- You need a laser cutter and basic knowledge of your machine's software.
- Plywood sold as 1/8 in varies a little in thickness: dry fit the parts before gluing.
- Fine fretwork: use good, flat plywood, and lift the parts off the bed with care.
Works with
Glowforge, xTool, LightBurn, OMTech, Epilog, Trotec, Thunder and any software that opens SVG, DXF, PDF or AI.
License
Limited commercial license included: you may sell up to 200 finished items you make from each design. Sharing, reselling or redistributing the digital files is not permitted.
Questions? Message me any time - happy to help.
How the download works
How the download works
Right after checkout your download link is on the order page, and it is emailed to you as well. The download is one zip that holds every file listed above. Nothing is shipped.
Which machines it works with
Which machines it works with
Any laser whose software opens SVG, DXF, PDF or AI: Glowforge, xTool, LightBurn machines, OMTech, Epilog, Trotec and others. Designs are made for 1/8 in (3 mm) material.
Share
