Skip to product information
1 of 10
Canoe on the Lake Camper Light Box Sticker Pack

Prefer not to paint?

Canoe on the Lake Camper Light Box Sticker Pack

The matching sticker pack colors every layer. Stick the printed sheets on your wood, line the laser up on the crosshairs and cut with the sticker on.

The first button puts the sticker pack and this cut file in your cart together: no need to add the cut file again.

Canoe on the Lake Camper Light Box Laser Cut File

Canoe on the Lake Camper Light Box Laser Cut File

Instant digital downloadSVG, DXF, PDF, AI7.5 x 2.75 x 4.54 in16 pieces

$3.63$9.07 60% off

Canoe on the Lake Camper Light Box: a camper light box cut file from MEJA Design Studio, drawn to be cut on your own laser from 1/8 in plywood.

This is a digital file. Nothing is shipped. You cut the box yourself from two 12 x 20 in sheets of 1/8 in (3 mm) plywood.

A vintage travel trailer light box: a camping scene cut through its side glows when an LED tea light is lit inside. It stands on two wooden wheels and its hitch's jack, and its wall is one strip of plywood bent round its rounded ends on laser-cut slits. The scene: a canoe on a calm mountain lake, the moon rising between the peaks. A ring glued on the front frames it like the trailer's skin. Its floor is flat, so the tea light stands on it, behind the scene.

What you get (instant digital download, one zip)

  • The cut files in SVG, DXF, PDF and AI formats: two 12 x 20 in sheets, one file for each sheet in each format
  • Assembly guide (PDF): every part by name and number, the sizes, what you need and the steps, numbered, with drawings
  • A picture of the box lit and a picture of the parts
  • The bend test strip: its cut file and how to read it
  • START_HERE and your license

Details

  • Size: 7.5 in long (9.07 in with the hitch), 2.75 in deep, 4.54 in tall on its wheels
  • 16 parts, all cut from 1/8 in (3 mm) plywood: the front with its scene, a ring that frames it, the back with its door and windows, a lining inside each, the wall strip that bends round them, an axle (two halves glued back to back), two wheels (each two discs glued back to back) and their hubcaps, and the hitch's tongue (two halves glued back to back)
  • An LED tea light slides in through the door in the back and stands on the flat floor. The door is 1.69 in wide and 2.2 in tall.
  • The wall is one strip 18.21 in long, bent on rows of laser-cut slits at the trailer's four rounded corners; its tabs go through slots in the linings of the two sides, so none shows outside
  • Two wheels 1.26 in across on a wooden axle that slots under the floor, and a hitch with its jack: it stands on them, and every joint presses together by hand; glue holds it
  • Sheet 2 holds only the hitch and the ring: a piece of 8 x 6 in is enough for it
  • Made for 1/8 in (3 mm) plywood ONLY. Every tab and slot is sized for 1/8 in (3 mm) wood, and the wall's slits for its bend. Do not resize the file: resizing changes the fit of every joint.
  • Red lines = cut. Blue lines = light marks (the fine lines of the scene; the rings on the wheels and the hubcaps (each hubcap is glued on its wheel's inner ring); the band round the hitch's propane tank and the collar on its jack): score or engrave them lightly, they never cut through. Part names are written as notes and are never cut.
  • Sold unfinished: the first picture shows it painted by hand, the next as it is cut. Leave the wood bare, stain it, or paint it by hand. Paint and stain are not part of this file.

You supply

  • Two 12 x 20 in sheets of 1/8 in (3 mm) plywood
  • Wood glue
  • Tape or a band, to hold the box square while the glue sets
  • A damp cloth: the slit wall bends more easily damp
  • A flameless LED tea light (about 1.5 in across): never a real candle

Prefer not to paint?

A matching printed sticker pack is available in our store: https://mejadesigns.com/products/canoe-on-the-lake-camper-light-box-1-sticker-pack. You stick each printed sheet on your plywood, line the laser up on its crosshairs and cut wood and sticker together: 16 parts come out colored, on the faces that show.

Please note

  • The scene is pierced right through the front: lit from inside, its sky glows. The wall is solid; the back has the door the tea light goes in by and two windows, which glow too.
  • Light it with a flameless LED tea light ONLY, never a real candle: wood burns.
  • The wall bends on rows of fine slits cut by the laser (a living hinge). How tightly wood bends differs from sheet to sheet, so cut and bend the bend test strip FIRST: it is in the download, and it takes a few minutes and a scrap of the same plywood.
  • This is a DIGITAL file. No physical item is shipped.
  • You need a laser cutter and basic knowledge of your machine's software.
  • Plywood sold as 1/8 in varies a little in thickness: dry fit the parts before gluing.
  • Fine fretwork: use good, flat plywood, and lift the parts off the bed with care.

Works with

Glowforge, xTool, LightBurn, OMTech, Epilog, Trotec, Thunder and any software that opens SVG, DXF, PDF or AI.

License

Limited commercial license included: you may sell up to 200 finished items you make from each design. Sharing, reselling or redistributing the digital files is not permitted.

Questions? Message me any time - happy to help.

How the download works

Right after checkout your download link is on the order page, and it is emailed to you as well. The download is one zip that holds every file listed above. Nothing is shipped.

Which machines it works with

Any laser whose software opens SVG, DXF, PDF or AI: Glowforge, xTool, LightBurn machines, OMTech, Epilog, Trotec and others. Designs are made for 1/8 in (3 mm) material.

View full details