Skip to product information
1 of 10

Christmas Eve Round Light Box Set Laser Cut File

Christmas Eve Round Light Box Set Laser Cut File

Instant digital downloadSVG, DXF, PDF, AI3 designs

$7.85$19.62 60% off

Christmas Eve Round Light Box Set brings 3 round light boxes from MEJA Design Studio together in one download, each in a folder of its own with its cut files and assembly guide, ready to cut on your own laser from 1/8 in plywood.

These are digital files. Nothing is shipped. You cut the boxes yourself from 1/8 in (3 mm) plywood.

Santa's sleigh across the moon, a nutcracker by the tree and a gingerbread house in the snow. Three round light boxes: each scene is cut through the front and glows when an LED tea light is lit inside. Each wall is one strip of plywood bent round on laser-cut slits.

The three boxes

  • Santa's Sleigh: A round light box: a scene cut through its front glows when an LED tea light is lit inside. Its wall is one strip of plywood bent round on laser-cut slits.
  • Nutcracker: A round light box: a scene cut through its front glows when an LED tea light is lit inside. Its wall is one strip of plywood bent round on laser-cut slits.
  • Gingerbread House: A round light box: a scene cut through its front glows when an LED tea light is lit inside. Its wall is one strip of plywood bent round on laser-cut slits.

Bought one by one, the three cut files sell for $10.47; this bundle is $7.85.

What you get (instant digital download, one zip)

  • Three folders, one for each box, each with its cut files in SVG, DXF, PDF and AI (two 12 x 20 in sheets a box), its assembly guide (PDF), its bend test strip and its pictures
  • START_HERE and your license, once for all three

Details

  • Each box's size: 6 in across, 2.5 in deep, 5.44 in tall
  • 6 parts, all cut from 1/8 in (3 mm) plywood: the front with its scene, a ring that frames it, the back with its tea light hole, and the wall strip that bends round them
  • An LED tea light slides in through a round hole in the back and stands on the flat floor. The hole is 1.61 in across.
  • The wall is one strip 17.21 in long, bent on rows of laser-cut slits; its tabs go through slots in the front and the back: it presses together by hand, and glue holds it
  • Made for 1/8 in (3 mm) plywood ONLY. Every tab and slot is sized for 1/8 in (3 mm) wood, and the wall's slits for its bend. Do not resize the file: resizing changes the fit of every joint.
  • Red lines = cut. Blue lines = light marks (the fine lines of the design (petals, veins, leaves)): score or engrave them lightly, they never cut through. Part names are written as notes and are never cut.
  • Sold unfinished: leave the wood bare, stain it, or paint it by hand. Paint and stain are not part of this file.

You supply (for each box)

  • Two 12 x 20 in sheets of 1/8 in (3 mm) plywood
  • Wood glue
  • Tape or a band, to hold the box square while the glue sets
  • A damp cloth: the slit wall bends more easily damp
  • A flameless LED tea light (about 1.5 in across): never a real candle

Prefer not to paint?

Each box has a matching printed sticker pack in our store, sold separately.

Please note

  • The scene is pierced right through the front: lit from inside, its sky glows. The wall and the back are solid but for the back's round hole, where the tea light goes in.
  • Light it with a flameless LED tea light ONLY, never a real candle: wood burns.
  • The wall bends on rows of fine slits cut by the laser (a living hinge). How tightly wood bends differs from sheet to sheet, so cut and bend the bend test strip FIRST: it is in the download, and it takes a few minutes and a scrap of the same plywood.
  • This is a DIGITAL file. No physical item is shipped.
  • You need a laser cutter and basic knowledge of your machine's software.
  • Plywood sold as 1/8 in varies a little in thickness: dry fit the parts before gluing.
  • Fine fretwork: use good, flat plywood, and lift the parts off the bed with care.

Works with

Glowforge, xTool, LightBurn, OMTech, Epilog, Trotec, Thunder and any software that opens SVG, DXF, PDF or AI.

License

Limited commercial license included: you may sell up to 200 finished items you make from each design. Sharing, reselling or redistributing the digital files is not permitted.

Questions? Message me any time - happy to help.

How the download works

Right after checkout your download link is on the order page, and it is emailed to you as well. The download is one zip that holds every file listed above. Nothing is shipped.

Which machines it works with

Any laser whose software opens SVG, DXF, PDF or AI: Glowforge, xTool, LightBurn machines, OMTech, Epilog, Trotec and others. Designs are made for 1/8 in (3 mm) material.

View full details