Prefer not to paint?
Eastern National Parks Camper Light Box Set Sticker Pack
The matching sticker pack colors every layer. Stick the printed sheets on your wood, line the laser up on the crosshairs and cut with the sticker on.
The first button puts the sticker pack and this cut file in your cart together: no need to add the cut file again.
Eastern National Parks Camper Light Box Set Laser Cut File
Eastern National Parks Camper Light Box Set Laser Cut File
Instant digital downloadSVG, DXF, PDF, AI10 designs
Eastern National Parks Camper Light Box Set brings 10 camper light boxes from MEJA Design Studio together in one download, each in a folder of its own with its cut files and assembly guide, ready to cut on your own laser from 1/8 in plywood.
These are digital files. Nothing is shipped. You cut the campers yourself from 1/8 in (3 mm) plywood.
The Eastern national parks, one vintage camper each: Acadia, Biscayne, Congaree, Dry Tortugas, Everglades, Great Smoky Mountains, Hot Springs, Mammoth Cave, New River Gorge and Shenandoah. Each is a vintage travel trailer light box: its scene, with the park's name cut through a rustic wooden entrance sign, is cut through its side and glows when an LED tea light is lit inside. It stands on two wooden wheels and its hitch's jack, and its wall is one strip of plywood bent round its rounded ends on laser-cut slits.
The 10 campers
- Acadia: The rocky pink granite coast of Acadia with Bass Harbor Head Lighthouse above the Atlantic, dark spruce trees
- Biscayne: Boca Chita Key lighthouse among palms, turquoise water and mangroves
- Congaree: A floodplain forest of tall bald cypress and tupelo with cypress knees and a boardwalk
- Dry Tortugas: The brick walls of Fort Jefferson on Garden Key in a turquoise sea
- Everglades: A river of sawgrass with cypress domes, palms and mangroves, an alligator in the slow water
- Great Smoky Mountains: Rows of misty blue ridges fading into the distance, an autumn forest of orange and red trees in front, a small log cabin, soft mist between the ridges
- Hot Springs: The historic bathhouses of Bathhouse Row below a wooded mountain
- Mammoth Cave: A wide arched cave mouth in a wooded limestone hillside, drawn as one clean white opening, stone steps leading down to it, tall hardwood forest round it and the Green River valley beyond
- New River Gorge: The steel arch bridge spanning the forested New River Gorge
- Shenandoah: Rolling blue ridges from Skyline Drive in autumn
Bought one by one, the 10 cut files sell for $36.50; this bundle is $29.20.
What you get (instant digital download, one zip)
- 10 folders, one for each camper, each with its cut files in SVG, DXF, PDF and AI (two 12 x 20 in sheets a camper), its assembly guide (PDF), its bend test strip and its pictures
- START_HERE and your license, once for all 10
Details
- Each camper's size: 7.5 in long (9.07 in with the hitch), 2.75 in deep, 4.54 in tall on its wheels
- 17 parts, all cut from 1/8 in (3 mm) plywood: the front with its scene, a ring that frames it, the back with its door and windows, a lining inside each, the wall strip that bends round them, an axle (two halves glued back to back), two wheels (each two discs glued back to back) and their hubcaps, and the hitch's tongue (two halves glued back to back), and a bumper sticker for the rear end
- An LED tea light slides in through the door in the back and stands on the flat floor. The door is 1.69 in wide and 2.2 in tall.
- The wall is one strip 18.21 in long, bent on rows of laser-cut slits at the trailer's four rounded corners; its tabs go through slots in the linings of the two sides, so none shows outside
- Two wheels 1.26 in across on a wooden axle that slots under the floor, and a hitch with its jack: it stands on them, and every joint presses together by hand; glue holds it
- Sheet 2 holds only back, lining and the hitch: a piece of 8 x 6 in is enough for it
- Made for 1/8 in (3 mm) plywood ONLY. Every tab and slot is sized for 1/8 in (3 mm) wood, and the wall's slits for its bend. Do not resize the file: resizing changes the fit of every joint.
- Red lines = cut. Blue lines = light marks (the fine lines of the scene; the rings on the wheels and the hubcaps (each hubcap is glued on its wheel's inner ring); the band round the hitch's propane tank and the collar on its jack): score or engrave them lightly, they never cut through. Part names are written as notes and are never cut.
You supply (for each camper)
- Two 12 x 20 in sheets of 1/8 in (3 mm) plywood
- Wood glue
- Tape or a band, to hold the box square while the glue sets
- A damp cloth: the slit wall bends more easily damp
- A flameless LED tea light (about 1.5 in across): never a real candle
Prefer not to paint?
A printed sticker pack for all 10 campers is available in our store: https://mejadesigns.com/products/eastern-national-parks-camper-light-box-set-1-sticker-pack. Stick each sheet on your plywood and cut wood and sticker together: every part comes out colored.
Please note
- The scene is pierced right through the front: lit from inside, its sky glows. The wall is solid; the back has the door the tea light goes in by and two windows, which glow too.
- Light it with a flameless LED tea light ONLY, never a real candle: wood burns.
- The wall bends on rows of fine slits cut by the laser (a living hinge). How tightly wood bends differs from sheet to sheet, so cut and bend the bend test strip FIRST: it is in the download, and it takes a few minutes and a scrap of the same plywood.
- This is a DIGITAL file. No physical item is shipped.
- You need a laser cutter and basic knowledge of your machine's software.
- Plywood sold as 1/8 in varies a little in thickness: dry fit the parts before gluing.
- Fine fretwork: use good, flat plywood, and lift the parts off the bed with care.
Works with
Glowforge, xTool, LightBurn, OMTech, Epilog, Trotec, Thunder and any software that opens SVG, DXF, PDF or AI.
License
Limited commercial license included: you may sell up to 200 finished items you make from each design. Sharing, reselling or redistributing the digital files is not permitted.
Questions? Message me any time - happy to help.
How the download works
How the download works
Right after checkout your download link is on the order page, and it is emailed to you as well. The download is one zip that holds every file listed above. Nothing is shipped.
Which machines it works with
Which machines it works with
Any laser whose software opens SVG, DXF, PDF or AI: Glowforge, xTool, LightBurn machines, OMTech, Epilog, Trotec and others. Designs are made for 1/8 in (3 mm) material.
Share
