Skip to product information
1 of 11
Gnome Tea Light Holder Sticker Pack

Prefer not to paint?

Gnome Tea Light Holder Sticker Pack

The matching sticker pack colors every layer. Stick the printed sheets on your wood, line the laser up on the crosshairs and cut with the sticker on.

The first button puts the sticker pack and this cut file in your cart together: no need to add the cut file again.

Gnome Tea Light Holder Laser Cut File

Gnome Tea Light Holder Laser Cut File

Instant digital downloadSVG, DXF, PDF, AI8.3 x 9.6 in18 pieces

$7.07$17.68 60% off

Gnome Tea Light Holder: a tea light holder cut file from MEJA Design Studio, drawn to be cut on your own laser from 1/8 in plywood.

Flameless LED tea light only: never a real candle (wood burns). The lantern is made for a battery tea light with a plastic flame.

This is a digital file. Nothing is shipped. You cut the holder yourself from two 12 x 20 in sheets of 1/8 in (3 mm) plywood.

A gnome in layered plywood, with the lantern hanging from it. The upright is cut as two halves of one outline, a front half and a back half, and each is built up in layers, front and back alike. Paint each half while it lies flat by itself, or cut it from the sticker pack's printed sheet, already colored; then the two are glued back to back: 8 sheets of wood in all, 0.9 in (24 mm) thick. It sets into a base of two plates, and the lantern slots together from two rings, a hoop and a floor (each two sheets, glued back to back): it holds one flameless LED tea light.

What you get (instant digital download, one zip)

  • The cut files in SVG, DXF, PDF and AI formats: two 12 x 20 in sheets, one file for each sheet in each format
  • Assembly guide (PDF): every part and every layer by name, the sizes, what you need and the steps, numbered
  • A picture of the finished holder and a picture of the parts
  • README and your license

Details

  • Stands 9.6 in tall and 8.3 in wide, on a 9.4 x 3.3 in base
  • Lantern: 3.1 in across, for one LED tea light of the standard size (1.5 in across)
  • 18 parts: the upright's two halves (front and back), two base plates, and two lantern rings, a hoop and a floor of two sheets each, and 6 layers glued on the halves (3 on the front half, their 3 mirror images on the back half)
  • Layered: the upright is 8 sheets thick (0.9 in), the same picture in relief on its front and on its back
  • Two halves: the upright is cut as a front half and a back half. Finish each one flat (paint it, or cut it from the sticker pack's printed sheet), then glue them back to back. The base's slots are cut for the two sheets
  • Two-sided lantern: its two rings, its hoop and its floor are each cut as two sheets of one outline, the second a mirror image. Finish each sheet flat on its outer face, then glue the two back to back, so the lantern is finished on both sides. Every slot and notch of the lantern is cut for the two sheets
  • Made for 1/8 in (3 mm) plywood ONLY: every slot is sized for that thickness. Do not resize the file: resizing changes the fit.
  • Red lines = cut. Blue lines = light marks: where the next layer is glued on, and where the tea light sits. Score or engrave them lightly: they never cut through. Part names are written as notes and are never cut.
  • Sold unfinished: the first picture shows the holder painted, the second as it is cut. Paint and stickers are not part of this file.

You supply

  • Two 12 x 20 in sheets of 1/8 in (3 mm) plywood
  • One flameless LED tea light (battery)
  • A short length of twine or thin wire
  • Wood glue

Prefer not to paint?

A matching printed sticker pack is available in our store: https://mejadesigns.com/products/gnome-tea-light-holder-1-sticker-pack. Its sheets go on your plywood whole and your laser cuts wood and paper together, so one face of each part comes out colored.

Please note

  • This is a DIGITAL file. No physical item is shipped.
  • LED tea light only. No wax tea light, not even for a moment: thin wood hangs right above it.
  • You need a laser cutter and basic knowledge of your machine's software.
  • Plywood sold as 1/8 in varies a little in thickness: dry fit the parts before gluing.

Works with

Glowforge, xTool, LightBurn, OMTech, Epilog, Trotec, Thunder and any software that opens SVG, DXF, PDF or AI.

License

Limited commercial license included: you may sell up to 200 finished items you make from this design. Sharing, reselling or redistributing the digital file is not permitted.

Questions? Message me any time - happy to help.

How the download works

Right after checkout your download link is on the order page, and it is emailed to you as well. The download is one zip that holds every file listed above. Nothing is shipped.

Which machines it works with

Any laser whose software opens SVG, DXF, PDF or AI: Glowforge, xTool, LightBurn machines, OMTech, Epilog, Trotec and others. Designs are made for 1/8 in (3 mm) material.

View full details