Southeast States Camper Light Box Set Laser Cut File
Southeast States Camper Light Box Set Laser Cut File
Instant digital downloadSVG, DXF, PDF, AI6 designs
Southeast States Camper Light Box Set brings 6 camper light boxes from MEJA Design Studio together in one download, each in a folder of its own with its cut files and assembly guide, ready to cut on your own laser from 1/8 in plywood.
These are digital files. Nothing is shipped. You cut the campers yourself from 1/8 in (3 mm) plywood.
The Southeast states, one vintage camper each: Florida, Georgia, North Carolina, South Carolina, Virginia and West Virginia. Each is a vintage travel trailer light box: its scene, with the name in bold retro script, is cut through its side and glows when an LED tea light is lit inside. It stands on two wooden wheels and its hitch's jack, and its wall is one strip of plywood bent round its rounded ends on laser-cut slits.
The 6 campers
- Florida: Florida in bold retro script across a sunset, palm trees at both ends and the waves below
- Georgia: Georgia in bold retro script across a sunset, live oaks at both ends and peach orchards below
- North Carolina: North Carolina in bold retro script across a sunset, pines at both ends and a lighthouse below
- South Carolina: South Carolina in bold retro script across a sunset, palmettos at both ends and the marsh below
- Virginia: Virginia in bold retro script across a sunset, dogwoods at both ends and the Blue Ridge below
- West Virginia: West Virginia in bold retro script across a sunset, pines at both ends and the mountains below
Bought one by one, the 6 cut files sell for $21.90; this bundle is $17.52.
What you get (instant digital download, one zip)
- 6 folders, one for each camper, each with its cut files in SVG, DXF, PDF and AI (two 12 x 20 in sheets a camper), its assembly guide (PDF), its bend test strip and its pictures
- START_HERE and your license, once for all 6
Details
- Each camper's size: 7.5 in long (9.07 in with the hitch), 2.75 in deep, 4.54 in tall on its wheels
- 17 parts, all cut from 1/8 in (3 mm) plywood: the front with its scene, a ring that frames it, the back with its door and windows, a lining inside each, the wall strip that bends round them, an axle (two halves glued back to back), two wheels (each two discs glued back to back) and their hubcaps, and the hitch's tongue (two halves glued back to back), and a license plate for the rear end
- An LED tea light slides in through the door in the back and stands on the flat floor. The door is 1.69 in wide and 2.2 in tall.
- The wall is one strip 18.21 in long, bent on rows of laser-cut slits at the trailer's four rounded corners; its tabs go through slots in the linings of the two sides, so none shows outside
- Two wheels 1.26 in across on a wooden axle that slots under the floor, and a hitch with its jack: it stands on them, and every joint presses together by hand; glue holds it
- Sheet 2 holds only the hitch and the ring: a piece of 8 x 6 in is enough for it
- Made for 1/8 in (3 mm) plywood ONLY. Every tab and slot is sized for 1/8 in (3 mm) wood, and the wall's slits for its bend. Do not resize the file: resizing changes the fit of every joint.
- Red lines = cut. Blue lines = light marks (the fine lines of the scene; the rings on the wheels and the hubcaps (each hubcap is glued on its wheel's inner ring); the band round the hitch's propane tank and the collar on its jack): score or engrave them lightly, they never cut through. Part names are written as notes and are never cut.
You supply (for each camper)
- Two 12 x 20 in sheets of 1/8 in (3 mm) plywood
- Wood glue
- Tape or a band, to hold the box square while the glue sets
- A damp cloth: the slit wall bends more easily damp
- A flameless LED tea light (about 1.5 in across): never a real candle
Please note
- The scene is pierced right through the front: lit from inside, its sky glows. The wall is solid; the back has the door the tea light goes in by and two windows, which glow too.
- Light it with a flameless LED tea light ONLY, never a real candle: wood burns.
- The wall bends on rows of fine slits cut by the laser (a living hinge). How tightly wood bends differs from sheet to sheet, so cut and bend the bend test strip FIRST: it is in the download, and it takes a few minutes and a scrap of the same plywood.
- This is a DIGITAL file. No physical item is shipped.
- You need a laser cutter and basic knowledge of your machine's software.
- Plywood sold as 1/8 in varies a little in thickness: dry fit the parts before gluing.
- Fine fretwork: use good, flat plywood, and lift the parts off the bed with care.
Works with
Glowforge, xTool, LightBurn, OMTech, Epilog, Trotec, Thunder and any software that opens SVG, DXF, PDF or AI.
License
Limited commercial license included: you may sell up to 200 finished items you make from each design. Sharing, reselling or redistributing the digital files is not permitted.
Questions? Message me any time - happy to help.
How the download works
How the download works
Right after checkout your download link is on the order page, and it is emailed to you as well. The download is one zip that holds every file listed above. Nothing is shipped.
Which machines it works with
Which machines it works with
Any laser whose software opens SVG, DXF, PDF or AI: Glowforge, xTool, LightBurn machines, OMTech, Epilog, Trotec and others. Designs are made for 1/8 in (3 mm) material.
Share
