Skip to product information
1 of 7
Hearts and Scrolls Santa Mail Mailbox Laser Cut File

Made for this cut file

Hearts and Scrolls Santa Mail Mailbox Laser Cut File

These stickers fit this design at its original size. The cut file download already holds the cut files laid out to match the sheets.

Need both? Choose “Sticker pack + digital cut file / Farmhouse” and save $1.53.

Hearts and Scrolls Santa Mail Mailbox Sticker Pack

Hearts and Scrolls Santa Mail Mailbox Sticker Pack

Printed to orderFree shipping in the contiguous U.S.7 x 4 x 9 in5 printed sheets

$25.04 $38.28 35% off

Color the Hearts and Scrolls Santa Mail Mailbox without picking up a brush. This MEJA Design Studio sticker pack is printed to match its cut file layer by layer: stick each sheet on your wood, cut wood and sticker together on your laser, and the pieces come out colored and ready to stack.

Choose your look

This design comes in 6 looks: choose yours under Look when you order. Every look prints the same pieces on the same sheets, cuts with the same print-and-cut files and costs the same.

  • Storybook: the detailed sticker painting, in the design's own colors
  • Country Tole: country tole painting, in the design's own colors
  • Simple Tole: simple country tole painting, in the design's own colors
  • Ornate Tole: ornate tole stroke work, in the design's own colors
  • Primitive: primitive antiqued tole painting, in the design's own colors
  • Farmhouse: farmhouse whitewash tole painting, in the design's own colors

What you get (physical item, shipped to you)

  • 5 printed sheets (largest about 12.2 x 9.2 in), UV printed in full color on laser-safe, PVC-free satin sticker paper
  • Artwork for 49 parts: the door, the back plate, the front frame, the linings of the door and both ends, both side walls, the nine slats of the round top, the flag, the 18 raised letters and their 4 scrolls, the door knob, the post and the base
  • Color theme: Big Sur Basic (the walls, the round top, the frames, the post, the base and the lettering; the painted design keeps its own colors)
  • Three registration crosshairs and at least five registration dots on every sheet, for LightBurn's Print and Cut and for lasers that line up by camera
  • A print-and-cut file for every sheet (SVG, DXF, PDF, AI) with the cut lines in exactly the same places, sent with the pack, and a how-to

How it works

  1. Sand your 1/8 in (3 mm) plywood smooth, wipe off the dust with a lightly damp rag and let it dry. Stick the sheet on, pressing from one edge outward.
  2. Open the cut file with the same number and line the laser up on the crosshairs (LightBurn: Tools > Print and Cut), or on the dots.
  3. Cut with the sticker on. Wipe off the soot with a lightly damp rag.
  4. Cut the other parts from the mailbox's main cut file on bare plywood, and build the mailbox as its guide says: the colored face of every part is the one that shows (a lining's looks into the mailbox).

Good to know

  • The paper is on the faces that show only, never on a joint, so every finger, tab and slot of the mailbox fits as it did.
  • The door and both ends are lined: each lining is glued on its part's inside face, bare wood on bare wood, its colored face looking into the mailbox. Its artwork is the part's own, turned as the lining is cut, so the colors meet at every opening.
  • The raised letters and scrolls are glued on the side walls (they are small parts on these sheets, each cut with its own sticker on its top face). Wood glue does not hold on a sticker, so the paper inside each engraved outline on the wall is peeled off first (11 outlines a wall; the sheet is printed white there), and so is the paper inside the ring the door's knob is glued on.
  • The base's small disc is glued on its large one, and the knob's smaller disc on its larger: the paper inside the circle scored there is peeled off first, too.
  • The post is doubled: each of its plates is cut twice, and the two halves are glued back to back, paper outward, wood on wood. It is colored all round.
  • No paper on the flag's two pegs and the floor: they do not show.
  • Made for the parts at the file's own size. If you resize the cut file, the stickers no longer fit.
  • The artwork is printed, not hand painted. Printed colors can differ slightly from your screen.

You also need

Options

  • Sticker pack only (you already have the file)
  • Sticker pack + digital cut file (the file is sent to you after purchase)

If you choose the pack with its cut file

The sticker pack is printed and shipped to you. The cut file is a digital download: its link is on the order page right after checkout, and it is emailed to you as well.

View full details